EnglishEnglish
Home / Resources / Blog

Electronic components

Knowing that you are interested in Electronic components, we have listed articles on similar topics on the website for your convenience. As a professional manufacturer, we hope that this news can help you. If you are interested in learning more about the product, please feel free to contact us.
2019
DATE
08 - 03
How to do incoming inspection in SMT patch processing factory
In SMT processing, solder paste printing, SMT chip, reflow soldering, etc. are all key processing steps, but before processing, there is a very important process is incoming inspection, the following Shenzhen Viasion Electronics introduces the types and methods of inspection before SMT assembly.
Read More
2019
DATE
04 - 01
Introduction to two common circuit board functions
The function of the electronic circuit board is to fix various components and then connect them by wires. The manufacturing method of the electronic circuit board is common. Here are some introductions. 1. Rivet circuit board On the insulation plate of 1.5 to 2 mm thick (usually epoxy fiberglass
Read More
2018
DATE
12 - 13
Some reasons for the poor tin on the tin surface of the circuit board
1. Storage environment and transportation: This is the middle link between the circuit board factory and the patch factory. Generally, the circuit board rarely appears in stock, but the general inventory requires the storage environment to have suitable dry humidity, complete packaging, and lightest
Read More
2018
DATE
12 - 07
Talking about the precautions of circuit board maintenance
In the process of using the circuit board in peacetime, it is often caused by improper use, incorrect processing or aging of components, which causes the circuit board to work abnormally or even burn out. At this time, it is necessary to repair the circuit board. Next, I will introduce you to the pr
Read More
2018
DATE
11 - 29
SMT chip processing basics
First, the characteristics of SMTThe assembly density is high, the size of the electronic product is small, and the weight is light. The volume and weight of the chip components are only about 1/10 of that of the conventional plug-in components. After the SMT is generally used, the volume of the ele
Read More
2018
DATE
11 - 08
Introduction of the process flow of pcb copy board
The copy board is also called the change board, which is the reverse technology research on the designed PCB board. With reference to a large amount of information, the process of copying boards is summarized as follows: The first step is to get a PCB. First, record the model, parameters, and positi
Read More

Social Community

Join our Social Community and keep in touch with all our latest technology investments, current news, upcoming events, and promotions.
Copyright@ 2007-2020 Viasion Technology Co., Ltd.